Circuit Soldering Assignment Essay Example | Topics and Well Written Essays - 500 words - 2

Circuit Soldering Assignment - Essay ExampleThey can also be covered (Linsley 46).Methods through which circuit bonding is achieved accept manual soldering whereby, a skilled individual uses his hand to solder joints that have flaws and to solder connections. In this method, it is vital to limit the time of contact of the soldering iron. Another method is reflow soldering where, solder is put at the joints before actual soldering. It is put at the joints as a paste or a preform. The solder is then melted through thawing with gas, or through resistance (Linsley 48).There are various tools used in circuit soldering. They include an electric soldering iron, and a soldering gun. A soldering gun is a trigger- controlled soldering iron. On being triggered, it takes just 10 seconds for the bit to attain 3150C. The soldering gun bits can be changed and are supposed to be tinned. Hence, it can be said that a soldering gun is a slip of a soldering iron. Soldering irons themselves are ma de up of a bobby pin that is insulated from heat. The handle holds a heating component of 15 to 25 Watts. It is in this component that the bit is slotted in. The bits come in various kinds like the copper ones that are easy to clean using a file. There also are the ironclad bits. These bits are not supposed to be cleaned as the copper bits. They are cleaned by rubbing under high temperature using a damp sponge (Linsley 47).Tinning has been mentioned, the question is, how is it through? Tinning is done through cleaning the bit, the soldering iron is then inserted and heated, cored solder is then apply with the excess been wiped off using a wet sponge (Linsley